Advanced Search

ALUMINIUM DYNAMO PULLEY

Cast in aluminium, these pulleys have a deeper groove to stop the fan belt jumping off at high revs and the larger diameter slows down the speed to stop the windings from over heating. To suit the C40 and C42 Lucas Dynamo.

MGB GEAR LEVER KNOB

Our MGB Gear Lever Knob is made in aluminium with a built-in overdrive switch. We supply 3 types of MGB Gear Lever Knobs: - Early 3 syncro gearboxes featured a 5/16 UNF thread, 4 syncro (66-76) have a 3/8 UNC thread whilst late (77 on) 4 syncro gearboxes have a 7/16 UNF thread.

As gearboxes may have changed over the years it's important that you check your thread type before ordering your part. 

PLUG LEAD NUMBERS

White plastic bands with black numbers to push over standard or competition 7mm plug lead when making them up.

MGB OIL PRESSURE INDICATOR LIGHT KIT

Saves expensive engine damage by attracting your attention before the oil pressure reaches zero.  Kit contains Oil Pressure Switch. mounting Tee Piece and 30.5cm (approx) diameter orange warning light. Cuts in at 20 psi (switch is adjustable).

Classic Sport Ignition Distributors - MGB

These distributors preserve the original look but replace the mechanical advance mechanism with modern electronics which takes the any mechanical play out of the equation.

Supplied with fitting instructions and with 16 advance curves to choose from, designed by DWR these units are ideal for those who want to fit and forget, or for those who wish to tune the engine, switch between the 16 curves with the turn of a screw, no more fiddling with tiny springs. 

Note: These models are suitable for 4 cylinder models and are supplied without drive shaft.

Also available as CSI PRO - See separate listing lower down.

Classic Sport Ignition Distributors - PRO - MGB

These distributors preserve the original look but replace the mechanical advance mechanism with modern electronics which takes the any mechanical play out of the equation.

The CSI Pro Ignition is a programmable distributor for your classic Car. You can adjust and program the advance curves yourself.

In addition to the PRO distributor, you need the CSI-PRO-BLUE  (iOS/Android) or the CSI-PRO-USB (Windows) programming module/cable.

Two selectable presets (modes) can be programmed, each with its own rpm and vacuum curve.

Plus various other settings such as

speed limiter

maximum total advance

and minimum rpm speed for activating the vacuum advance

DISTRIBUTOR CLAMPS

These are machined from aluminium and clamp the distributor more firmly resulting in less likelihood of the timing slipping. When using the Lucas 25D6 the distributor will require machining.

For other models please contact our Parts Team.

MALLORY ROTOR ARM

Mallory Rotor Arm

RED ROTOR ARM

Red rotor arm suitable for original Lucas distributor or our CSI distributor

COMPETITION HT LEAD

The traditional yellow and black Lucas competition wire HT lead.

Price stated is per meter.