Cooling

SPIN-ON OIL FILTER CONVERSION KIT

admin — Mon, 18 Feb 2008 12:40:32 +0000

Our adapter replaces the complete oil filter housing at the block, which then accepts the modern spin-on filter, thus making changing the oil filter a much easier and cleaner job. Also helps fitment of oil coolers .The modern design also has much improved filtration and includes a magnet within it.

REMOTE OIL FILTER ADAPTOR

admin — Mon, 18 Feb 2008 12:40:33 +0000

This adaptor is for people that wish to fit a remote oil filter as per the works cars. It bolts directly onto the side of the block and has two 1/2" BSP unions to accept the oil pipes. Inc. gasket and bolts

REPLACEMENT OIL COOLERS

admin — Mon, 18 Feb 2008 12:40:33 +0000

We stock a variety of sizes, others are available to order.

THERMOSTATIC SANDWICH PLATE

admin — Mon, 18 Feb 2008 12:40:32 +0000

Optional extra to use with the spin-on filter kit and the oil cooler kit if you wish.

OIL COOLER KIT

admin — Mon, 18 Feb 2008 12:40:32 +0000

Both our kits use 5/8 BSP fittings with large bore stainless steel braided hose to increase oil flow. Included is a 13 row 5/8 BSP cooler with specific brackets. The 6 cylinder cooler bolts directly to the front lower part of the radiator using the radiators own mounting bolts. The 4 cylinder brackets give the choice of mounting it vertically in front of the radiator attached to the ducting or horizontally to the ducting with a hole cut and small scoop. In each case the pipes are the correct length to match with the filter sandwich plate.

REMOTE OIL FILTER HOUSING

admin — Mon, 18 Feb 2008 12:40:33 +0000

This housing can be bolted to the foot well or inner wing and accepts a modern spin-on type filter, it is also available with or without a 5/8" UNF thread for a temperature sender

UP-RATED RADIATORS

admin — Tue, 23 Dec 2008 15:00:10 +0000

These radiators have been specially developed from our competition experiences. They are fitted with a special core which has more cooling tubes and fins per square inch. This helps keep the running temperatures down.

ALUMINIUM RADIATORS

admin — Mon, 18 Feb 2008 12:40:31 +0000

These are the latest design and are available on an outright purchase.

ALUMINIUM WATER PUMP PULLEY

admin — Mon, 18 Feb 2008 12:40:31 +0000

Designed with a much deeper "V" for the belt to run in. This helps to stop the belt from jumping off when high revs are being used.

4 CYLINDER NARROW FAN BELT CONVERSION KIT

admin — Mon, 18 Feb 2008 12:40:32 +0000

Designed to eliminate the vibration problems at high revs caused by the original wide fan belt. This kit consists of an aluminium deep 'V' water pump pulley, aluminium deep 'V' dynamo pulley, cast iron crankshaft pulley and cogged fan belt to suit.This kit is to suit the original dynamo, the pulleys are available separately if using
an alternator.