Front Suspension

COMPETITION SPRINGS

admin — Mon, 18 Feb 2008 12:46:54 +0000

Sold individually.

SPRING PLATFORM

admin — Mon, 18 Feb 2008 12:46:54 +0000

Reproduction of standard BN1 to BJ8 item.

TOP TRUNION

admin — Mon, 18 Feb 2008 12:46:54 +0000

Machined from new forgings as per original BN1 to BJ8 item..

HEAVY DUTY FRONT STUB AXLE

admin — Mon, 18 Feb 2008 12:46:54 +0000

After having three front stub axles snap off on our race Healey many years ago, we decided that something had to be done. Therefore we have taken brand new bare forgings and machined them with bigger radii where possible. These come ready to fit with reamed kingpin bushes.
Suitable for BN2 to BJ7.
NOTE: Over 50% of stub axles that we have examined have been cracked. Therefore we will crack test yours free of charge.

FRONT LOWER WISHBONES

admin — Mon, 18 Feb 2008 12:46:55 +0000

Machined from new forgings as per the original BN2 - BJ8

ADJUSTABLE FRONT SHOCK ABSORBER MOUNTINGS

admin — Wed, 24 Dec 2008 14:39:20 +0000

Rectify your incorrect camber angles, caused by a bend or damaged chassis, with these hollow front chassis tops which have slots and an adjuster thread to allow the inner threaded sliding plate to move with the shock absorber. Being made from top quality steel the threads will not pull out, thus holding the shock absorber more securely.

BUMP STOP SPACERS AND TUBE NUTS

admin — Mon, 18 Feb 2008 12:46:55 +0000

When fitting front spring lowering blocks, the bump stops should be raised by the same amount, particularly on rally cars.

UPRATED SHOCK ABSORBERS

admin — Wed, 24 Dec 2008 14:47:42 +0000

These are up-rated by approximately 30%

OFFSET TRUNION BUSH SET

admin — Mon, 18 Feb 2008 12:46:53 +0000

These bushes are machined from graphite impregnated nylon. They are designed to replace the standard rubber bush, thus helping to stiffen the front king pin. The off-set hole through the middle of the bush enables you to set the front suspension to negative camber. Recommended for all cars.

LOWER WISHBONE NYLON BUSH SET

admin — Mon, 18 Feb 2008 12:46:53 +0000

These bushes are machined from graphite impregnated nylon, thus helping to stiffen up the lower wishbones. Recommended only for racing.