STEEL BILLET CAM SHAFT

Brand new, made from the best quality steel and fully heat-treated, available in various profiles with large base circles.

Gun drilled with oil feed to each lobe and four bolt sprocket fixings.

Price stated is per item.

Please click below to download the Camshaft Profile Specification Sheet, this includes a description of the different cam profiles.

RE-GROUND CAM SHAFTS

Original iron cams re-profiled, all supplied with oil fed base circles and four bolt sprocket fixings. Available with a choice of profiles.

Please note there is a surcharge of £45.00 if your cams are not 4 bolt or have no oil holes.

Please click below to download the Camshaft Profile Specification Sheet, this includes a description of the different cam profiles.

COMPETITION VALVE STEM SEALS

Modern design lip in steel case these fit directly to our wide angle valve guides or can be fitted to the straight port with a small amount of machining.

CAST IRON NEW CAMSHAFTS

Brand new cast iron camshafts as the originals, all supplied with oil fed large base circles and four bolt sprocket fixings. Now an affordable option for a brand new outright sale.

Please click to download the attachment below for a Camshaft Profile Specification Sheet that includes a description of the different cam profiles.

CAM COVER BLANKING PLUG

Billet aluminium plug to seal up the hole at the far end of the cam cover.

Extra Images: 

BRONZE VALVE GUIDES

To suit the original 5/16" valve stem diameter and a choice of outside diameters.

VALVE SPRINGS

Tried and tested competition springs to suit these demanding conditions.
Both sets suit the original top cap, however fitted lengths must be checked.

LARGE DIAMETER CAM FOLLOWER SLEEVES

1 1/2" diameter sleeves to suit the large cam buckets required when using race camshafts. Precision ground OD manufactured from Colisbro-Bronze, the best lubrication and hardest wearing material, a must for this application.

Supplied with slightly undersize ID to allow for final sizing once fitted.

LARGE DIAMETER STEEL CAM FOLLOWERS

Lightweight and fully heat treated these 1 1/2" diameter bucket followers are necessary when using race cams. They will require the cylinder head sleeves to be replaced for larger ones.

Price stated is per item.

CAMSHAFT LUBE

Specially formulated to help lubricate camshaft and buckets on start up. Always apply liberally to both cam and buckets during engine build-up.